Preparazione microSD Acqua

#per far funzionare la wifi
apt-get install wireless-tools

#Firmware del modulo WiFi
apt-get install firmware-ralink

#Per collegarsi in WiFi
apt-get install wpasupplicant

#Per far funzionare killall
apt-get install psmisc

apt-get install gcc

apt-get install evtest

#Per X
apt-get install xorg

Per calibrare il touch va scaricato il package xinput-calibrator dal repository sid:

# wget http://ftp.us.debian.org/debian/pool/main/x/xinput-calibrator/xinput-calibrator_0.7.5+git20140201-1_armhf.deb
# dpkg -i xinput-calibrator_0.7.5+git20140201-1_armhf.deb
# xinput_calibrator

Non sono sicuro che serva ma andrebbe indagato

apt-get install iw
General setup  --->
    -> Kernel .config support
    <*> Kernel .config support 
    [*]   Enable access to .config through /proc/config.gz 

General setup  --->
    Timers subsystem  --->  
        [*] High Resolution Timer Support 

[*] Networking support  ---> 
    -*-   Wireless  --->        
    [*]     cfg80211 wireless extensions compatibility   

/etc/network/interfaces

auto wlan0
iface wlan0 inet dhcp
wpa-ssid Vodafone-23812521
wpa-psk acmesystemsrobertosergio
wireless-mode managed
wireless-essid any
wpa-driver wext
wpa-ap-scan 2
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK

/etc/udev/rules.d/70-persistent-net.rules

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="*", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"